Fossil mammoth tooth slice 6.9 oz
Fossil mammoth tooth slice, 6.9 ounces. 6 x 3 x an even ¼ inches. A single piece, but most knife handle pattens could be laid out and cut from this. A very unusual cut of the tooth going lengthwise not crosscut. Stronger, different patterning. Will make a very unique finished product. Back has been resin coated to add strength and make an even flat back. Good job, blends in, should not show. Could be sanded off if desired, end up with about 1/16th tooth in my opinion, fragile and hard to work with. This material require some skill to use successfully. However the end product tends to be top dollar. If it were me, I’d use diamond tools, but possible to work with bandsaw, regular belt sanding. Other uses a display or display stand for example. Set art or pocket knife on this for display . A very top end material. Surface is all natural.